Marble & Tile · Al Wasl, Dubai
Marble Polishing and Crystallisation in Al Wasl
Diamond honing and crystallisation, not a machine and a wax.
Marble Polishing and Crystallisation for villas and low rise, central and largely established in Al Wasl, Dubai.
MELLS restores marble in Dubai by diamond honing the damaged surface back and then crystallising it, so the finish comes from the stone rather than from a coating.
Cut back through the stone, then hardened
Diamond grinding, honing and polishing works the stone itself rather than laying a coating over it. The shine is the marble, so it does not peel, cloud or wear off in traffic lanes.
- Diamond grinding, honing and polishing in sequence
- Crystallisation to harden the surface
- Sealed against water and oil staining
Edges, thresholds and skirting included
The middle of a floor is the easy part. What gives a polish away is the perimeter, the door thresholds and the stair nosings.
- Perimeters and thresholds worked by hand
- Stair nosings and risers included
- Adjacent joinery protected throughout
Maintained so it does not need doing again
Most marble is ruined by the wrong daily cleaner, not by traffic. We leave you with a maintenance routine and the right product for it.
- Correct pH neutral products left on site
- Maintenance routine written down for your team
- Scheduled top up rather than a full re-polish
About this service
Marble Polishing and Crystallisation for Al Wasl properties
Established properties with original finishes, where restoration is almost always cheaper than replacement.
Al Wasl is characterised by villas and low rise, central and largely established, and that shapes the work. Marble in a Dubai villa dulls for one of two reasons: fine sand walked across it acting as an abrasive, or acidic spills etching the surface. Neither is dirt, so neither responds to cleaning. The stone has to be cut back through progressive diamond grits and then crystallised, which is a chemical and thermal reaction that hardens the surface rather than coating it.
We quote after a site visit rather than over the phone, because the figure has to be based on what is actually there. The price we give you after that visit is the price you pay.
What is included
- Diamond honing through progressive grits to remove scratching and etch damage
- Crystallisation to harden the surface and raise the gloss without a coating
- Grout raking, cleaning and colour matched regrouting where needed
- Edge and skirting work, which is where a cheap job always shows
- Full dust containment and protection of joinery and skirting
- Sealing where the stone type calls for it
How it works in Al Wasl
Site visit
We attend the property, look at what is actually there, and tell you what we would do and what we would leave alone.
Fixed written price
Agreed before anything starts. If we open something up and the picture changes, we stop and tell you rather than adding it to the invoice.
Protection first
Floors, joinery, glass and landscaping protected before a tool comes out. This is the part most contractors treat as optional.
The work, by our own team
Directly employed and trained. Nothing is subcontracted, so one company is accountable for the result.
Walk through and record
We walk the property with you against the before images and leave a written record of what was done.
Before anything is quoted
We look at the property before we put a number on it
A price list cannot see your marble, your ducts, or the wall the afternoon sun hits. So we come and look. A senior member of the team surveys the property, and you receive a written quotation the same day, itemised, with what is included and what is not.
No obligation. If we are not the right company for the job we will say so, and tell you who is.
- 01The survey
We look at the property, not a price list. Usually the same day you ask.
- 02The written quote
Fixed, itemised, and sent the same day. What is included, and what is not.
- 03The work
A named supervisor and a crew you will see again. Our own equipment and materials.
- 04The walkthrough
We walk the property with you before the team leaves. Anything not right is dealt with then.
Frequently asked questions
What is the best marble polishing and crystallisation company in Al Wasl?
Judge any company on three things: whether the team is directly employed or subcontracted, whether the quote is fixed in writing before work starts, and whether a supervisor walks the property with you at the end. MELLS does all three as standard.
How quickly can you start marble polishing and crystallisation?
Survey usually the same day you ask, quotation the same day, and work scheduled within forty eight hours in most cases. Urgent call outs are handled the same day where the team is free.
Is marble polishing and crystallisation safe for children and pets?
Yes. Products are selected for occupied family homes as the default, re entry times are told to you before we leave, and anything stronger is only ever used with your agreement.
How much does marble polishing cost in Dubai?
It is priced by area and by how much damage there is, so we survey the floor first. Etching and deep scratching take more passes than a floor that has simply gone dull.
Can dull or scratched marble be restored without replacing it?
Almost always. Honing removes the damaged layer and crystallisation hardens what is underneath. Replacement is very rarely the right answer.
Who does marble polishing near me in Dubai?
MELLS works across Dubai and Abu Dhabi, including Emirates Hills, Palm Jumeirah, Downtown, Saadiyat Island and Al Bateen.
How long does marble polishing last?
Years in a normal household, less in a high traffic entrance. Barrier matting at the doors extends it more than anything else, because it stops sand arriving.
How do I get a quote from MELLS?
Message us on WhatsApp on +971 58 656 3001 or call the same number. A senior member of the team surveys the property and you receive a written itemised quotation the same day.
Which areas of the UAE does MELLS cover?
Ninety communities across Dubai for residential work, and Dubai, Abu Dhabi and Sharjah for commercial premises.
Can dull marble be brought back without replacing it?
Almost always. Honing removes the damaged surface layer and crystallisation hardens what is underneath, so the finish comes from the stone rather than from a coating.
How much disruption is there?
The work is wet and it is dusty at the honing stage, so the area is contained and protected first. Rooms are handed back progressively rather than all at the end.
How long does the finish last?
Years in a normal household, less in a high traffic entrance. Barrier matting at the doors is the single biggest thing that extends it, because it stops sand arriving.
Book marble polishing and crystallisation in Al Wasl
Send us a few photographs and the size of the property and we will arrange a site visit.
The difference
Why a cheap marble Polishing and Crystallisation job is expensive
The gap is not the price. It is what is actually reached, and whether anyone can show you it was.
The low cost visit
- A polymer coating laid over the stone
- Shine that peels and clouds in traffic lanes
- Perimeters, thresholds and stair nosings skipped
- No sealing afterwards, so staining continues
- Adjacent joinery and skirting left marked
- The whole floor needing redoing within a year
The MELLS method
- Diamond grinding, honing and polishing in sequence
- The shine is the stone itself, so it cannot peel
- Crystallisation to harden the finished surface
- Perimeters, thresholds and stair nosings worked by hand
- Sealed against water and oil staining on completion
- Correct pH neutral maintenance products left with you
Worth a look
Signs you need marble Polishing and Crystallisation
No surprises, at any point
How the process works
Tell us about the property
A message on WhatsApp with the community and the size of the property is enough to start. No forms and no call centre.
A survey, usually the same day
A senior member of the team looks at the actual property rather than a price list, and notes what needs particular attention.
A written, itemised quotation
Sent the same day. It states what is included and what is not. No day rate creep and no line added at the end.
The team arrives fully equipped
Everything needed comes with them. There is nothing for you to buy, prepare or supply.
Supervised throughout
A supervisor is on site, not on the phone, and the work is checked as it progresses rather than only at the end.
You walk it with us
Nothing is signed off until you have seen it. Anything you are not happy with is put right before we leave.
Marble Polishing and Crystallisation by community
Written for the property stock in each area rather than one page for the whole city.
- Al Barari
- Al Bateen
- Al Mushrif
- Al Raha Beach
- Al Rahmaniya
- Al Reem Island
- Al Safa
- Arabian Ranches
- Corniche Abu Dhabi
- District One
- Downtown Dubai
- Dubai Creek Harbour
- Dubai Hills Estate
- Dubai Marina
- Emirates Hills
- Hidd Al Saadiyat
- Jumeirah Bay Island
- Jumeirah Golf Estates
- Jumeirah Islands
- Khalifa City
- Meydan
- Nurai Island
- Palm Jumeirah
- Saadiyat Island
- Sharqan
- Tilal Al Ghaf
- Tilal City
- Umm Suqeim
- Yas Island
Ready to book marble Polishing and Crystallisation?
Quick response, a trained team you will see again, and a price agreed in writing before we start.